Ryder Racing Silicone Turbo Inlet - WRX (08-14)
Ryder Racing™ Silicone Turbo Intake Hose
Ryder Racing™ silicone turbo intake hose is a great upgrade to replace that leaky OEM plastic hose that will throw codes, cause engine misfires and sporadic idling. The Ryder Racing turbo intake hose is inspired from the OEM Subaru STI item but analysed carefully and improved where it is needed, using larger smoother internal diameter, large billet aluminum spigots designed by Ryder Racing ensuring they will never break or crack from engine heat or vibrations, unlike other inferior cheap nylon products.
Due to increases in Silicone technology our Ryder Racing intake hose has a larger capacity and smoother internal body which increases air flow with minimal turbulence. Stainless steel support wire woven in between multi layers of silicone prevent the hose from collapsing during high boost loads, this enables faster spool response and lag while increasing horse power.
For those who will be using the factory blow off valve (BOV), the intake hose has a machined aluminum ring for re-connection, for those upgrading to an atmospheric venting BOV an adapter and blanking plug is available through our store to remove the plastic factory transfer pipe.
The Ryder Racing turbo inlet hose has also been developed with ease of installation in mind, some other manufactures claim “no manifold removal” but we all know it ends up in the intake manifold having to be removed. The Ryder Racing intake hose has step by step instructions which results in semi removal of the intake manifold which cuts out several hours in additional expenses.
The intake hose also comes with 304 grade stainless steel, worm drive hose clamps and a true T-Bolt to secure the hose to the turbo, this also ensures all hoses are fastened without leaks. Other manufacturers use less quality zinc plated clamps which are prone to rusting in just a few months.
- 1 x Silicone Turbo Intake Hose
- Stainless steel worm drive hose clamps
- Stainless Steel T-Bolt clamp
- 4 x Ryder Racing Billet annodised elbows
- 1 x Cap head screw
- 1 x Instructions (online through member portal)
- 1 x Ryder Racing sticker
Subaru EJ25, Subaru WRX 06-14, FXT 06-14, LGT, 05-07