{"title":"Fuel System","description":"","products":[{"product_id":"ryco-fuel-filter-z348","title":"Ryco - Fuel Filter - Z348","description":"\u003cp\u003e- High efficiency filtration, removing more dirt \u0026amp; providing clean, filtered fuel\u003c\/p\u003e\n\u003cp\u003e- Superior fuel economy\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ryco","offers":[{"title":"Default Title","offer_id":42564198022,"sku":"Z348","price":45.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/fuel_filter.jpg?v=1500006548"},{"product_id":"walbro-fuel-pump-gss342-255-l-h-forester-01-07","title":"Walbro - Fuel Pump - GSS342- 255 LPH With Fitting Kit (Forester - SF 97-02)","description":"\u003cp\u003eThe Walbro GSS342 fuel pump is one of the most popular aftermarket fuel pumps on the market today. Flowing 255 Liters Per Hour it can flow enough fuel for most applications under 500 hp. This kit also comes with the Walbro fitting kit.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e•Fuel Pump\u003cbr\u003e•Pickup filter with adaptor for Subaru\u003cbr\u003e•Wire harness\u003cbr\u003e•Hose clamps\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur complete range of in-line and in-tank pumps feature components and systems that are developed and constantly validated to meet ever-changing regulatory requirements. No wonder TI Automotive is widely recognized as the leader in direct-fit fuel system upgrades for more than 20 years.\u003c\/p\u003e\n\u003cp\u003eThe Walbro 255LPH high pressure fuel pump is highly recommended for vehicles with engine performance purposes. Installing a Walbro high pressure fuel pump in a non-performance vehicle will not damage your motor. All fuel first passes through fuel injectors and a fuel pressure regulator which only send the required amount of fuel into the intake manifold, sending the unused fuel (usually more than 1000%) back to the fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe industry’s gold standard for over two decades, the GSS  line is compatible with a wide range of vehicles, features unsurpassed quality, durability and performance, and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCOMPATIBLE WITH MOST VEHICLES AND FUEL TYPES\u003c\/li\u003e\n\u003cli\u003eUNSURPASSED QUALITY, RELIABILITY AND PERFORMANCE\u003c\/li\u003e\n\u003cli\u003eBUILT TO EXCEED OE SPECIFICATIONS\u003c\/li\u003e\n\u003cli\u003eHIGH-PRESSURE PERFORMANCE (UP TO 112 PSI) WITH MINIMAL FLOW LOSS\u003c\/li\u003e\n\u003cli\u003eSUPERIOR HOT FUEL HANDLING PERFORMANCE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":42565792262,"sku":"GSS342KIT","price":149.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT.jpg?v=1590290753"},{"product_id":"walbro-fuel-pump-gss342-255-l-h-with-fitting-kit-wrx-sti-94-07","title":"Walbro - Fuel Pump - GSS342- 255 L\/H With Fitting Kit (WRX\/STi - GD 01-07)","description":"\u003cp\u003eThe Walbro GSS342 fuel pump is one of the most popular aftermarket fuel pumps on the market today. Flowing 255 Liters Per Hour it can flow enough fuel for most applications under 500 hp. This kit also comes with the Walbro fitting kit.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e•Fuel Pump\u003cbr\u003e•Pickup filter with adaptor for Subaru\u003cbr\u003e•Wire harness\u003cbr\u003e•Hose clamps\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur complete range of in-line and in-tank pumps feature components and systems that are developed and constantly validated to meet ever-changing regulatory requirements. No wonder TI Automotive is widely recognized as the leader in direct-fit fuel system upgrades for more than 20 years.\u003c\/p\u003e\n\u003cp\u003eThe Walbro 255LPH high pressure fuel pump is highly recommended for vehicles with engine performance purposes. Installing a Walbro high pressure fuel pump in a non-performance vehicle will not damage your motor. All fuel first passes through fuel injectors and a fuel pressure regulator which only send the required amount of fuel into the intake manifold, sending the unused fuel (usually more than 1000%) back to the fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe industry’s gold standard for over two decades, the GSS  line is compatible with a wide range of vehicles, features unsurpassed quality, durability and performance, and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCOMPATIBLE WITH MOST VEHICLES AND FUEL TYPES\u003c\/li\u003e\n\u003cli\u003eUNSURPASSED QUALITY, RELIABILITY AND PERFORMANCE\u003c\/li\u003e\n\u003cli\u003eBUILT TO EXCEED OE SPECIFICATIONS\u003c\/li\u003e\n\u003cli\u003eHIGH-PRESSURE PERFORMANCE (UP TO 112 PSI) WITH MINIMAL FLOW LOSS\u003c\/li\u003e\n\u003cli\u003eSUPERIOR HOT FUEL HANDLING PERFORMANCE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":42566066374,"sku":"GSS342KIT","price":149.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT_9e09ff97-43c0-448c-b868-1658b1297cf0.jpg?v=1590292098"},{"product_id":"walbro-fuel-pump-f90000267-460-l-h-with-fitting-kit","title":"Walbro - Fuel Pump - F90000267 - 450 L\/H With Fitting Kit","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOutperforms all current market in-tank fuel pumps and is Designed for engines with more than 750 HP.\u003cbr\u003eAward-winning OE technology - High-pressure, high-flow performance OEM technology designed and developed for E85\u003c\/p\u003e\n\u003cp\u003eDual channel turbine design for maximum efficiency under high pressure and high temperature applications\u003cbr\u003eMade in USA by TI Automotive (parent company of Walbro)\u003c\/p\u003e\n\u003cdiv class=\"col-12 mb-4\"\u003e\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e90 Degree Strainer\u003c\/li\u003e\n\u003cli\u003eOutperforms all current market in-tank fuel pumps\u003c\/li\u003e\n\u003cli\u003eDesigned for engines with more than 750 HP\u003c\/li\u003e\n\u003cli\u003eAward-winning OE technology\u003c\/li\u003e\n\u003cli\u003eHigh-pressure, high-flow performance\u003c\/li\u003e\n\u003cli\u003eOEM technology designed and developed for E85\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"col-12 mb-4\"\u003e\n\u003ch3\u003eWHAT'S INCLUDED\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12\"\u003e\n\u003cp\u003e(1) Walbro 450LPH Pump\u003cbr\u003e(1) Wiring Harness\u003cbr\u003e(1) Fuel Strainer\u003c\/p\u003e\n\u003cdiv class=\"col-12 mb-4\"\u003e\n\u003ch3\u003eCOMPATIBILITY\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12\"\u003e\n\u003cp\u003ePlease note this is a Universal Product - alteration may be required to fit this product to your specific vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":43590096518,"sku":"F90000267","price":239.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/F90000267_90.jpg?v=1590293506"},{"product_id":"turbosmart-fpr800-v3-fuel-pressure-regulator-1-8npt-black","title":"Turbosmart - FPR800 V3 - Fuel Pressure Regulator - 1\/8NPT - Black","description":"\u003cp\u003eTurbosmart's newest High-performance EFI fuel pressure regulator is smaller, lighter and better! Now featuring two 1\/8\" NPT inlet ports, one 1\/8\" NPT return port and 1\/8\" gauge port, 35-90 PSI base pressure adjustment, 1:1 ratio, premium diaphragm and stainless steel valve + seat allow for ANY fuel type including E85 and is suitable for engines with up to 800hp fuel systems. FPR's feature a non-directional bias to regulation, so no matter where the fuel comes in they will regulate the same. Factory tested.\u003c\/p\u003e\n\u003cp\u003eWHY BUY A TURBOSMART FPR?\u003cbr\u003e All Turbosmart FPRs are CNC machined in house from billet aluminium + stainless steel and hand-assembled and tested to ensure maximum precision. Turbosmart FPR’s have been designed to provide smooth and stable fuel pressure delivery under all conditions from idle to full throttle and are suitable for use with both electric and mechanical fuel pumps. The FPR range features an easy screw and lock adjustment and provide a stable 1:1 ratio between fuel pressure and manifold pressure. Each FPR is backed by a variety of accessories such as fuel rail adapters, gauges and fittings to suit most popular makes and models.\u003c\/p\u003e\n\u003cp\u003eWHAT IS A FUEL PRESSURE REGULATOR?\u003cbr\u003e A fuel pressure regulator’s job is to maintain constant fuel pressure above the intake manifold pressure.\u003c\/p\u003e\n\u003cp\u003eWHEN DO YOU NEED TO INSTALL ONE?\u003cbr\u003e The installation of performance fuel injectors or a high-flow fuel pump requires the use of an aftermarket fuel pressure regulator to allow pressure adjustments while maintaining a stable base pressure. They can also be used to maximise a standard fuel system’s ability to cope with minor power modifications.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":47922706054,"sku":"TS-0401-1102","price":251.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/TS-0401-1102.jpg?v=1501828756"},{"product_id":"turbosmart-fuel-pressure-gauge-0-100psi","title":"Turbosmart - Fuel Pressure Gauge (0-100psi)","description":"\u003cp\u003eGauge - Fuel Pressure. Suits Turbosmart Fuel Pressure Regulator Series including FPR800, 1200, 2000 and 3000. Fits 1\/8 NPT.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":47922746566,"sku":"TS-0402-2023","price":37.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/TS-0402-2023.jpg?v=1501828828"},{"product_id":"gfb-fx-s-fuel-pressure-regulator","title":"GFB - FX-S Fuel Pressure Regulator","description":"GO FAST BITS FX SERIES EFI FUEL PRESSURE REGULATORS FEATURE:\u003cbr\u003e\u003cbr\u003e•1:1 fuel pressure rise rate\u003cbr\u003e\u003cbr\u003e•Double layer\/double reinforced diaphragms with a burst strength exceeding 1000psiFX S 300pix\u003cbr\u003e\u003cbr\u003e•Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down\u003cbr\u003e\u003cbr\u003e•Spring pre-load adjustment screw is o-ring sealed and does not leak vacuum\/boost\u003cbr\u003e\u003cbr\u003e•Static pressures adjustable from 28psi to 72psi\u003cbr\u003e\u003cbr\u003e•Completely serviceable\u003cbr\u003e\u003cbr\u003e•Multiple body ports allow for a large variety of setup options\u003cbr\u003e\u003cbr\u003e•Features 4x 1\/8” NPT ports which can be used for any combination of fuel inlet\/s or pressure gauge\/ECU sensor, and 1x 1\/8” NPT return port \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGO FAST BITS FX SERIES EFI FUEL PRESSURE REGULATORS JOIN OUR EXISTING LINE OF SUCCESSFUL PRODUCTS, BUILT WITH THE SAME PRECISION, MACHINING QUALITY, AND RELIABILITY THAT IS THE FOUNDATION OF GFB’S REPUTATION.\u003cbr\u003e\u003cbr\u003eFrom the 800Hp FX-S Street to the 1500Hp FX-R Race version, and whether you run pump petrol\/gasoline, Ethanol, Methanol or Diesel, we have you covered no matter what your Fuel Pressure Regulator requirements are.\u003cbr\u003e\u003cbr\u003eWhat sets us apart from the competition? Well, if you’re looking for an EFI Fuel Pressure Regulator that seals and behaves just like your factory unit but with the added reliability and high flowing capacity you require, then look no further than the FX-S.\u003cbr\u003e\u003cbr\u003eHow have we achieved this? Our engineers have spent countless hours developing a unique replaceable co-polymer valve seat. What does this mean? Conventional aftermarket performance Fuel Pressure Regulators typically utilize a metal-to-metal valve and seat which by nature will not\u003cbr\u003epositively hold pressure when your engine is shut down, which can make startup more difficult.\u003cbr\u003e\u003cbr\u003eHere at Go Fast Bits, we have incorporated a softer, more compliant yet resilient material for the valve seat, which will always positively seal and hold fuel pressure on shut down, designed to give factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels.\u003cbr\u003e\u003cbr\u003eWe also use a double layer diaphragm, which means we have twice the reinforcing material, and as a result the burst strength exceeds 1000psi!\u003cbr\u003e\u003cbr\u003eThe FX-S offers multiple fuel inlet and gauge ports that allow for a wide range of fuel system setups beyond the usual inlet\/outlet, including parallel fuel rail or returnless “deadhead” systems. The two gauge ports allow you to run a mechanical fuel pressure gauge AND an ECU fuel\u003cbr\u003epressure sensor if you want to.","brand":"GFB","offers":[{"title":"Default Title","offer_id":12176454418522,"sku":"8050","price":246.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/8051_1.jpg?v=1530069474"},{"product_id":"gfb-fuel-pressure-gauge","title":"GFB - Fuel Pressure Gauge","description":"\u003cp\u003eFuel Pressure Gauge\u003c\/p\u003e\n\u003cp\u003e40mm (1 1\/2 inch) Fuel Pressure Gauge.\u003cbr\u003e\u003cbr\u003e1\/8 mpt thread with a fuel pressure range from 0 to 120 psi.\u003c\/p\u003e","brand":"GFB","offers":[{"title":"Default Title","offer_id":12176456384602,"sku":"5730","price":31.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/5730_web.jpg?v=1637905382"},{"product_id":"injector-dyanmics-id1050x-fuel-injectors","title":"Injector Dynamics - ID1050 XDS Fuel Injectors","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eApplication : Top Feed Subaru\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ID1050 XDS is the evolution of the ID1000x, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference.\u003cbr\u003e\u003cbr\u003e- Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.\u003cbr\u003e- Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.\u003cbr\u003e- Improved internal flow path increases output by 5% without sacrificing low flow performance.\u003cbr\u003e- Stronger magnetic circuit offers stable operation up to 10 bar.\u003cbr\u003e- Replaceable inlet filter extends service life.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBasic Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e- Nominal Flow Rate – 1065cc\/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)\u003cbr\u003e- Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)\u003cbr\u003e- Fuel Compatibility – Compatible With All Known Fuels\u003c\/p\u003e","brand":"ID","offers":[{"title":"Default Title","offer_id":12334289911898,"sku":"1050.48.11.WRX.4","price":899.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/312150_037e0aa3-61bc-4bb9-b54c-ca5649b35f9c.webp?v=1770700743"},{"product_id":"injector-dynamics-id1300x-fuel-injectors","title":"Injector Dynamics - ID1300 XDS Fuel Injectors","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eApplication : Top Feed Subaru\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ID1300 XDS is an all new injector, designed in partnership with Bosch Motorsport. \u003cbr\u003eThis collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. \u003cbr\u003eThe ID1300 XDS was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. \u003cbr\u003eIt is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. \u003cbr\u003e\u003cbr\u003eWhile the ID1300 XDS was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. \u003cbr\u003eThe ID1300 XDS has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. \u003cbr\u003eIn addition to its multi-fuel capabilities, the compact body of the ID1300 XDS allows fitment in 200+ applications, making it the most versatile injector in our lineup. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBasic Specifications:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Nominal Flow Rate – 1335cc\/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)\u003cbr\u003e- Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)\u003cbr\u003e- Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)\u003c\/p\u003e","brand":"ID","offers":[{"title":"Default Title","offer_id":12334336802906,"sku":"1300.48.11.WRX.4","price":1539.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/312150_037e0aa3-61bc-4bb9-b54c-ca5649b35f9c.webp?v=1770700743"},{"product_id":"torque-solution-fuel-rails-top-feed-upgrade-subaru-black","title":"Torque Solution - Fuel Rails - Top Feed Upgrade - Subaru - Black","description":"\u003cp\u003eTorque Solution Billet Aluminum Top Feed Fuel Rails\u003c\/p\u003e\n\u003cp\u003eApplications: Subaru WRX 2002-2014, STI 2007-2018, Legacy GT 2007-2012, Forester XT 2006-2013\u003cbr\u003e\u003cbr\u003eTorque Solution Top Feed Fuel Rails are a must have for high horsepower applications and a perfect complement to your high flow fuel injectors. \u003cbr\u003eOur rails are made from 6061 Billet Aluminum with a 5\/8\" ID for maximum fuel flow and threaded for -8 O-Ring boss fittings (not included). \u003cbr\u003ePerfect for setting up your fuel system in parallel to ensure each cylinder receives optimal fueling. All our rails come anodized with our logo engraved into the billet to look as good as they perform. Zinc install hardware is included to prevent rusting.\u003cbr\u003e\u003cbr\u003e- 6061 Billet Aluminum\u003cbr\u003e- 5\/8\" ID\u003cbr\u003e- Threaded for -8 O-Ring Boss Fittings (not included)\u003cbr\u003e- Black Anodized\u003cbr\u003e- Compatible with all fuel types\u003cbr\u003e- Zinc Install Hardware Included\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":12334351614042,"sku":"TS-SU-400BK","price":429.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/TS-SU-400BK.jpg?v=1533699426"},{"product_id":"zeitronix-ethanol-content-analyzer-kit-eca-2-red-gauge-round-plug-and-play","title":"Zeitronix - Ethanol Content Analyzer Kit (ECA-2) - RED Gauge - Round (Plug and Play)","description":"We offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, \u003cbr\u003eFlow Through Flex Fuel Sensor and ECA Harness with a correct connector with Plug and Play Harness. \u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle. \u003cbr\u003eFor performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel. \u003cbr\u003eHigher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003cbr\u003e\u003cbr\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e- Two 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003cbr\u003e- Connecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003cbr\u003e- Optional real time E% Ethanol Content Gauge.\u003cbr\u003eThe E% gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). Check out the gallery for gauge installation pictures.\u003cbr\u003e The E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003e ECA-2 is required for E% Gauge operation.\u003cbr\u003e- A flex fuel sensor is required. The ECA-2 is compatible with some OEM sensors used in GM vehicles with the flex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003e ECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003cbr\u003e- ECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003cbr\u003e- Made in the USA!","brand":"Zeitronix","offers":[{"title":"Default Title","offer_id":12334382153818,"sku":"ECA-2KitWRX - RED","price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/ECA-2KitRedWRX.jpg?v=1533700262"},{"product_id":"injector-dynamics-id1700x-fuel-injectors","title":"Injector Dynamics - ID1750X Fuel Injectors","description":"\u003cp\u003e\u003cstrong\u003eThe Best Just Got Better!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ID1750 is the successor to the ID1700, featuring numerous improvements.\u003c\/p\u003e\n\u003cp\u003eCompared to the 1700, the 1750 offers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigher Dynamic Flow Rate With no Increase in Minimum Fuel Mass.\u003c\/li\u003e\n\u003cli\u003eBetter Cylinder to Cylinder Balance at Low Pulsewidths.\u003c\/li\u003e\n\u003cli\u003eImproved Pressure Sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll while retaining the same “Compatible with everything but dirt” corrosion resistance that made the ID1700 famous.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe original ID1700-XDS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ID1700-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700-XDS was designed to fill the gap between the ID1300-XDS and the ID2000, and like the ID1300x, it features corrosion resistant internals making it compatible with all known automotive fuels. A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700-XDS immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700-XDS excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.\u003c\/p\u003e\n\u003cp\u003eThe ID1700-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe ID1700-XDS will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline. If you need flawless drivability on gasoline, the ID1300-XDS will provide this, and is capable of approximately 150hp per injector on E85.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Flow Rate:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1728cc\/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Differential Fuel Pressure:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e7.0 Bar (101.5 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Connector:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eUSCAR\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Compatibility\u003c\/strong\u003e \u003cspan\u003e \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eMTBE\u003c\/li\u003e\n\u003cli\u003eNitromethane\u003c\/li\u003e\n\u003cli\u003eAll Known Hydrocarbon Fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ID","offers":[{"title":"Default Title","offer_id":31210448224346,"sku":"1750.48.11.WRX.4","price":1974.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/zzfh.jpg?v=1743467422"},{"product_id":"injector-dynamics-id2000-fuel-injectors","title":"Injector Dynamics - ID2600 XDS Fuel Injectors","description":"\u003cp\u003eThe ID2600-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID2600-XDS was developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol. The ID2600-XDS has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x.\u003c\/p\u003e\n\u003cp\u003eThe ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Dual Slope Matching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDual Slope Matching is a method of matching injectors that provides the best possible cylinder to cylinder fueling across the entire operating range.\u003c\/p\u003e\n\u003cp\u003eTraditionally, injectors were matched based on static flow rate alone, which resulted in large deviations at low pulse widths.\u003c\/p\u003e\n\u003cp\u003eInjector Dynamics introduced Slope Intercept Matching over a decade ago, which provided even cylinder to cylinder fueling across the linear operating range of the injector.\u003c\/p\u003e\n\u003cp\u003eWith the progression of turbo technology, and increased use of alcohol fuels, greater demands are placed on fuel injectors, and they are often required to deliver fuel well outside of their linear operating range.\u003c\/p\u003e\n\u003cp\u003eThe concept of Dual Slope Matching extends the injector matching into the lower non linear operating range. Dual Slope Matching was conceived by Aaron Looft of Injector Dynamics, who was inspired by the dual slope injector characterization model used by Ford.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow Does Dual Slope Matching Work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLets first consider static flow matching which was the industry standard prior to Injector Dynamics.\u003c\/p\u003e\n\u003cp\u003eThe graph below shows the dynamic response of two hypothetical 1500 cc\/min injectors within their linear operating range. One with an offset (Dead time, latency, etc.) of 0.95 milliseconds, and one with an offset of 0.85 milliseconds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe slope of both lines is the same, as they have the same flow rate, but the difference in offset results in the injector with the higher offset delivering 2.5 uL less fuel per injection event. At a pulse width of 19msec, which equals 90% duty cycle at 6,000 rpm, 2.5ul amounts to a mere 0.6% difference in flow between the two injectors, but at 2msec, that same 2.5ul difference amounts to a 9.5% difference!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSlope Intercept matching as introduced by Injector Dynamics in 2007 solved this problem by matching injectors based on flow rate (Slope) and offset (Intercept) providing even cylinder to cylinder fueling across the linear operating range.\u003c\/p\u003e\n\u003cp\u003eMoving on to the non linear operating range, the graph below shows a pair of 1500cc injectors matched using the Injector Dynamics Slope Intercept method. Both injectors have the same flow rate and offset, but in the non linear range, the flow deviates from the straight line shown in the graph above. In this case, the flow rate, or slope of each injector in the non linear range is 1530cc\/min and 1470cc\/min representing a spread of +\/- 2%.\u003c\/p\u003e\n\u003cp\u003eAs the graph clearly shows, the difference between the two injectors increases as pulse width decreases.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eShown as percent difference in flow, we see that even though the injectors are matched perfectly in the linear operating range, the difference in slope in the non linear range results in a flow mismatch that is magnified as the pulse-width decreases, becoming substantial at the very lowest pulse widths.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow Well Does This Work in Practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoving from hypothetical injectors to a real world application, the response in the non linear range is considerably less orderly than shown in the graphs above, and is quantified using a technique called Least Squares Linear Regression � Which is a fancy way of saying straight line approximation.\u003c\/p\u003e\n\u003cp\u003eBy approximating the response in the non linear range, and matching sets accordingly, the best possible cylinder to cylinder fueling is realized across the entire operating range.\u003c\/p\u003e\n\u003cp\u003eUsing the ID2600-XDS as an example, the traditional Slope Intercept method of matching results in an average deviation of +\/-5.1% in the non linear range, while the new method of Dual Slope Matching has reduced this to +\/-1.4%\u003c\/p\u003e\n\u003cp\u003eIn a perfect world, this deviation would not exist at all, but for those of us who live (And tune!) in the real world, Dual Slope Matching represents a large step forward, and we are proud to offer it to the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClick \"Vehicle Fitment\" tab to see narrowed down vehicle list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Some vehicles may have multiple possible injector sizes available\u003c\/strong\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAlways compare sizing provided in the listing (length and O-Ring size) against\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003einjectors currently fitted to vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ID","offers":[{"title":"Default Title","offer_id":31210514579546,"sku":"2600.48.11.WRX.4","price":2344.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/2600.48.11.WRX.4.jpg?v=1618186957"},{"product_id":"gfb-fx-r-fuel-pressure-regulator-6an-ports","title":"GFB - FX-R Fuel Pressure Regulator (-6AN Ports)","description":"\u003cp\u003eGO FAST BITS FX SERIES EFI FUEL PRESSURE REGULATORS FEATURE:\u003cbr\u003e\u003cbr\u003e• 2x -6AN inlet port, 2x 1\/8” NPT pressure gauge\/sensor ports, and 1x -6AN return port\u003cbr\u003e\u003cbr\u003e• Flows up to 1300 litres per hour @ 25psi\u003cbr\u003e\u003cbr\u003e• 1:1 fuel pressure rise rate\u003cbr\u003e\u003cbr\u003e• Double layer\/double reinforced diaphragms with a burst strength exceeding 500psi\u003cbr\u003e\u003cbr\u003e• Teflon co-polymer seat with spherical stainless valve to retain fuel pressure longer after shut down\u003cbr\u003e\u003cbr\u003e• Spring pre-load adjustment screw is o-ring sealed and does not leak vacuum\/boost\u003cbr\u003e\u003cbr\u003e• Static pressures adjustable from 25psi to 80psi\u003cbr\u003e\u003cbr\u003e• Completely serviceable\u003cbr\u003e\u003cbr\u003eGO FAST BITS FX SERIES EFI FUEL PRESSURE REGULATORS JOIN OUR EXISTING LINE OF SUCCESSFUL PRODUCTS, BUILT WITH THE SAME PRECISION, MACHINING QUALITY, AND RELIABILITY THAT IS THE FOUNDATION OF GFB’S REPUTATION.\u003cbr\u003e\u003cbr\u003eFrom the 800Hp FX-S Street to the 1500Hp FX-R Race version, and whether you run pump petrol\/gasoline, Ethanol, Methanol or Diesel, we have you covered no matter what your Fuel Pressure Regulator requirements are.\u003cbr\u003e\u003cbr\u003eWhat sets us apart from the competition? Well, if you’re looking for an EFI Fuel Pressure Regulator that seals and behaves just like your factory unit but with the added reliability and high flowing capacity you require, then look no further than the FX-S.\u003cbr\u003e\u003cbr\u003eHow have we achieved this? Our engineers have spent countless hours developing a unique replaceable co-polymer valve seat. What does this mean? Conventional aftermarket performance Fuel Pressure Regulators typically utilize a metal-to-metal valve and seat which by nature will not\u003cbr\u003epositively hold pressure when your engine is shut down, which can make startup more difficult.\u003cbr\u003e\u003cbr\u003eHere at Go Fast Bits, we have incorporated a softer, more compliant yet resilient material for the valve seat, which will always positively seal and hold fuel pressure on shut down, designed to give factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels.\u003cbr\u003e\u003cbr\u003eWe also use a double layer diaphragm, which means we have twice the reinforcing material, and as a result the burst strength exceeds 1000psi!\u003cbr\u003e\u003cbr\u003eThe multiple fuel inlet and gauge ports that allow for a wide range of fuel system setups beyond the usual inlet\/outlet, including parallel fuel rail or returnless “deadhead” systems. The two gauge ports allow you to run a mechanical fuel pressure gauge AND an ECU fuel\u003cbr\u003epressure sensor if you want to.\u003c\/p\u003e","brand":"GFB","offers":[{"title":"Default Title","offer_id":31316926234714,"sku":"8060","price":296.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/02-10.jpg?v=1574136318"},{"product_id":"psr-raceworks-zeitronix-flex-fuel-kit-w-pushlock-hose-wrx-01-14-oem-fuel-setup","title":"PSR\/Raceworks\/Zeitronix Flex Fuel Kit w\/Pushlock Hose - STi (01-20) (OEM Fuel Setup)","description":"\u003cp\u003e\u003cspan style=\"color: #ef0707;\"\u003e\u003cstrong\u003eNOTE - \u003c\/strong\u003e\u003cstrong\u003eSuits factory fuel rail plumbing with OEM Fuel Pressure Regulator.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePro Speed Racing now offer flex fuel packages including the Zeitronix ECA2 kit with quality Raceworks 5\/16\" Pushlock rubber hose and fittings. Also included is the PSR Plug and Play ECA Harness which deletes the rear O2 sensor and uses its ECU input for easy setup. (Tuning required).\u003c\/p\u003e\n\u003cp\u003eThe Zeitronix ECA2 (Ethanol Content Analyser) kit includes a Flow Through Flex Fuel Sensor, the Ethanol Content Analyser module and an ECA Harness. E85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. The ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel by measuring the actual ethanol content so the ECU can run the vehicle safely no matter the ethanol content*. (*Tuning required)\u003c\/p\u003e\n\u003cp\u003eECA2 Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/li\u003e\n\u003cli\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/li\u003e\n\u003cli\u003eOptional real time E% Ethanol Content Gauge (RED) .\u003c\/li\u003e\n\u003cli\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). Check out the gallery for gauge installation pictures.\u003c\/li\u003e\n\u003cli\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003c\/li\u003e\n\u003cli\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/li\u003e\n\u003cli\u003eMade in the USA!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis kit incorporates the Raceworks 400 Series Rubber Hose has an inner liner of Nitrile which is reinforced with braid made from high tensile synthetic textile cord to give it extra strength. Raceworks 400 Series rubber hose is safe for use with E85, methanol, oils, lubricants and coolant. Recommended for use on low pressure systems\/temperature applications. If using in high pressure or temperature above 70°C we recommend securing hose ends with a clamp. All Raceworks products come with a 2 year warranty.\u003c\/p\u003e\n\u003cp\u003eHose is not submersible.\u003c\/p\u003e\n\u003cp\u003eTemperature Range: -40°C to 100°C. Ethanol \u0026amp; Methanol Safe.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eImportant Notes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePicture shows rough plumbing layout only. Actual layout will depend on engine bay components and personal taste.\u003c\/li\u003e\n\u003cli\u003eKit includes unassembled hose and fittings which will require cutting and assembling. Additional tools\/supplies may be required. This allows user to decide optimal hose lengths and routing.\u003c\/li\u003e\n\u003cli\u003eSuits factory fuel rail plumbing with OEM Fuel Pressure Regulator.\u003c\/li\u003e\n\u003cli\u003eOEM FPR has a simple clamp-on fuel hose between it and the fuel return line which will be reused. Cut off the OEM quick connect fitting from this fuel line and connect the exposed hose to the supplied barbed quick connect fitting for the ECA sensor, or purchase new 5\/16\" rubber fuel hose to run between.\u003c\/li\u003e\n\u003cli\u003eTuning is required to correct rear O2 sensor CEL.\u003c\/li\u003e\n\u003cli\u003eEthanol Sensor will require a custom mounting solution and a suitable location.\u003c\/li\u003e\n\u003cli\u003eThis kit is designed to adapt to SAE Quick Connect EFI fittings only. Please check engine bay feed\/return lines and compare with the second photo on listing to determine compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHose Specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5AN\u003c\/li\u003e\n\u003cli\u003eOperating Pressure: 250psi\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 750psi   \u003c\/li\u003e\n\u003cli\u003eInside DIA. Inch: 5\/16”\u003c\/li\u003e\n\u003cli\u003eInside DIA. MM: 7.9mm\u003c\/li\u003e\n\u003cli\u003eOutside DIA. Inch: 9\/16”  \u003c\/li\u003e\n\u003cli\u003eOutside DIA. MM: 14.2mm\u003c\/li\u003e\n\u003cli\u003eWeight Grams per Metre: 140g \u003c\/li\u003e\n\u003cli\u003eBend Radius Inch: 1.38\"\u003c\/li\u003e\n\u003cli\u003eBend Radius MM: 35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZeitronix ECA2 Ethanol Content Analyser\u003c\/li\u003e\n\u003cli\u003e1 Metre Raceworks 400 Series Pushlock Hose\u003c\/li\u003e\n\u003cli\u003eRaceworks SAE Quick Connect EFI to Barb Fittings\u003c\/li\u003e\n\u003cli\u003eHose Clamps\u003c\/li\u003e\n\u003cli\u003ePSR ECA Plug and Play Harness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zeitronix","offers":[{"title":"Default Title","offer_id":31934156406874,"sku":"PSR-ECA-002-400","price":849.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/PSR-ECA-002-400BL.jpg?v=1582847550"},{"product_id":"zeitronix-id1050-dw-flex-fuel-combo-package-red-wrx-08-14","title":"Zeitronix\/ID1050\/AEM - Flex Fuel Combo Package RED WRX (08-14)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-17.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934200545370,"sku":"Zeit-Combo-Red","price":1815.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_32d07c68-72e1-4bd1-8ccd-48016ac54840.jpg?v=1596591875"},{"product_id":"zeitronix-id1050-dw-flex-fuel-combo-package-red-sti-08-17","title":"Zeitronix\/ID1300\/AEM - Flex Fuel Combo Package Red WRX (08-14)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-17.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934202183770,"sku":"Zeit-Combo-Red_1300","price":2399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_662e9023-8695-473a-bf84-238abfbfc85b.jpg?v=1596591940"},{"product_id":"zeitronix-id1300-dw-flex-fuel-combo-package-red-sti","title":"Zeitronix\/ID1300\/AEM - Flex Fuel Combo Package Red STi (08-21)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-21.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934206214234,"sku":"Zeit-Combo-Red_1300","price":2399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_0776f453-b687-43f8-8259-7677731b746f.jpg?v=1596591925"},{"product_id":"zeitronix-id1300-dw-flex-fuel-combo-package-red-forester-xt-08-13","title":"Zeitronix\/ID1300\/AEM - Flex Fuel Combo Package Red Forester XT (08-13)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-17.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934208278618,"sku":"Zeit-Combo-Red_1300","price":2399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_6b8d4854-e3cd-402d-8b3a-f71084165193.jpg?v=1596591994"},{"product_id":"zeitronix-id1050-dw-flex-fuel-combo-package-red-sti-08-18","title":"Zeitronix\/ID1050\/AEM - Flex Fuel Combo Package RED STi (08-21)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-21.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934211194970,"sku":"Zeit-Combo-Red","price":1815.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_e34cf298-3fbf-4ef0-9b17-d4b42f1209c8.jpg?v=1596591851"},{"product_id":"zeitronix-id1050-dw-flex-fuel-combo-package-red-forester-xt-08-17","title":"Zeitronix\/ID1050\/AEM - Flex Fuel Combo Package RED Forester XT (08-13)","description":"\u003cp\u003eZeitronix Flex Fuel Kit Plug and Play for the Subaru WRX 08-14 and STI 08-17.. No more cutting wires and having to solder new connections on.. We have made it as simple as possible to have the complete package. *\u003cspan\u003eMust use ECUTEK or COBB ACCESS PORT\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombo Package consits of\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eID1050 Injector Dynamic Matched Set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEM 340LPH Fuel Pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZeitronix ECA 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play harness kit for ECA Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play Harness kit for Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eZeitronix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyser, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.  \u003cbr\u003e\u003cbr\u003eWhat's your ethanol percentage?\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003cbr\u003e\u003cbr\u003eWhy know your ethanol percentage?\u003cbr\u003eE85 has the equivalent octane rating of 105 or higher octane fuel.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. \u003c\/p\u003e\n\u003cp\u003eThe Zeitronix Ethanol Content Analyser helps you get the most out of your engine and fuel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnecting harness to Zeitronix Flow Through FLEX Fuel Sensor is included. Harness length is 8 ft (2.4m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOptional real time E% Ethanol Content Gauge.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe E%  gauge is only 3\/4\" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be\u003c\/span\u003e\u003cspan\u003esurface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2” 1\/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). \u003c\/span\u003e\u003cspan\u003eCheck out the gallery for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeitronix.com\/customers\/gallery.htm#LCD_installs\"\u003egauge installation pictures\u003c\/a\u003e.\u003cbr\u003eThe E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).\u003cbr\u003eECA-2 is required for E% Gauge operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA flex fuel sensor is required.  The ECA-2 is compatible with some OEM sensors used in GM vehicles with the fle\u003c\/span\u003e\u003cspan\u003ex fuel insignia or which run on E85. However GM offers a large number of different sensors with different specs.\u003cbr\u003eECA-2 Kit which includes Zeitronix tested Flex Fuel Sensor \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECA-2 dimensions: 3\" x 2\" x 1\" (76mm x 50mm x 25mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eECA KIT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg align=\"right\" alt=\"\" border=\"0\" height=\"127\" src=\"http:\/\/zeitronix.com\/images\/ECA\/FlexSensorFlowThrough_250.gif\" width=\"250\"\u003e\u003c\/strong\u003e\u003cbr\u003eWe offer new Flow Through Flex Fuel Sensor as a part of ECA-2 Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector.ECA Kitcan be purchased\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eThe ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle.  For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhy know your ethanol percentage?\u003c\/strong\u003e\u003cbr\u003eE85 has the equivalent octane rating of 105 octane gasoline.  Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself.  The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the sizes of the flex fuel sensor inflow and outflow lines?\u003c\/strong\u003e\u003cbr\u003eZeitronix Flow Through Flex Fuel Sensor both tubes are 0.37\" and 0.5\" at the flange.\u003cbr\u003e\u003cbr\u003eThe usual mounting location for the sensor is the return fuel line\u003cstrong\u003e. \u003c\/strong\u003e Make sure the sensor is filled completely with fuel.\u003cbr\u003e\u003cstrong\u003eA professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECA-2 Analog Outputs\u003c\/strong\u003e\u003cbr\u003eEthanol content and temperature analog outputs are available as part of the ECA-2.  \u003cstrong\u003eThe flex fuel sensor does not provide these outputs.\u003c\/strong\u003e  We have created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":31934212243546,"sku":"Zeit-Combo-Red","price":1815.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/Zeit-Combo-Blue_1300_18d0096a-26e3-447a-a295-726c240ea526.jpg?v=1596591758"},{"product_id":"walbro-fuel-pump-gss342-255-lph-with-fitting-kit-forester-sg-03-07","title":"Walbro - Fuel Pump - GSS342- 255 LPH With Fitting Kit (Forester - SG 03-07)","description":"\u003cp\u003eThe Walbro GSS342 fuel pump is one of the most popular aftermarket fuel pumps on the market today. Flowing 255 Liters Per Hour it can flow enough fuel for most applications under 500 hp. This kit also comes with the Walbro fitting kit.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e•Fuel Pump\u003cbr\u003e•Pickup filter with adaptor for Subaru\u003cbr\u003e•Wire harness\u003cbr\u003e•Hose clamps\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur complete range of in-line and in-tank pumps feature components and systems that are developed and constantly validated to meet ever-changing regulatory requirements. No wonder TI Automotive is widely recognized as the leader in direct-fit fuel system upgrades for more than 20 years.\u003c\/p\u003e\n\u003cp\u003eThe Walbro 255LPH high pressure fuel pump is highly recommended for vehicles with engine performance purposes. Installing a Walbro high pressure fuel pump in a non-performance vehicle will not damage your motor. All fuel first passes through fuel injectors and a fuel pressure regulator which only send the required amount of fuel into the intake manifold, sending the unused fuel (usually more than 1000%) back to the fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe industry’s gold standard for over two decades, the GSS  line is compatible with a wide range of vehicles, features unsurpassed quality, durability and performance, and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCOMPATIBLE WITH MOST VEHICLES AND FUEL TYPES\u003c\/li\u003e\n\u003cli\u003eUNSURPASSED QUALITY, RELIABILITY AND PERFORMANCE\u003c\/li\u003e\n\u003cli\u003eBUILT TO EXCEED OE SPECIFICATIONS\u003c\/li\u003e\n\u003cli\u003eHIGH-PRESSURE PERFORMANCE (UP TO 112 PSI) WITH MINIMAL FLOW LOSS\u003c\/li\u003e\n\u003cli\u003eSUPERIOR HOT FUEL HANDLING PERFORMANCE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":34424823382178,"sku":"GSS342KIT","price":149.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT_54e1f65f-8316-4a62-86e0-9432c039f0ae.jpg?v=1590292047"},{"product_id":"walbro-fuel-pump-gss352-350-lph-with-fitting-kit-wrx-sti-gd-01-07","title":"Walbro - Fuel Pump - GSS352- 350 LPH With Fitting Kit (WRX\/STi - GD 01-07)","description":"\u003cp\u003eSUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V\u003c\/p\u003e\n\u003cp\u003eGSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e350 LPH \/ 90 GPH RATED AT 40PSI 13.5V\u003c\/li\u003e\n\u003cli\u003eFeatures an upgraded outlet design with improved one piece construction\u003c\/li\u003e\n\u003cli\u003eFuel: Gas\u003c\/li\u003e\n\u003cli\u003eOE quality\u003c\/li\u003e\n\u003cli\u003e39mm diameter\u003c\/li\u003e\n\u003cli\u003eEasily mountable to new or existing in-tank hangers\u003c\/li\u003e\n\u003cli\u003ePositive displacement for robust performance\u003c\/li\u003e\n\u003cli\u003eManufactured in TI Automotive's Caro, Michigan plant - Made In USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GSS352 Fuel Pump Only\u003c\/li\u003e\n\u003cli\u003e1 x Installation Fitting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Actual product may vary from image shown\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":34424825643170,"sku":"GSS352G3Kit","price":174.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT_d2a11145-7e64-4bfc-8889-50e7752010ca.jpg?v=1590292395"},{"product_id":"walbro-fuel-pump-gss352-350-lph-with-fitting-kit-forester-sf-97-02","title":"Walbro - Fuel Pump - GSS352- 350 LPH With Fitting Kit (Forester - SF 97-02)","description":"\u003cp\u003eSUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V\u003c\/p\u003e\n\u003cp\u003eGSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e350 LPH \/ 90 GPH RATED AT 40PSI 13.5V\u003c\/li\u003e\n\u003cli\u003eFeatures an upgraded outlet design with improved one piece construction\u003c\/li\u003e\n\u003cli\u003eFuel: Gas\u003c\/li\u003e\n\u003cli\u003eOE quality\u003c\/li\u003e\n\u003cli\u003e39mm diameter\u003c\/li\u003e\n\u003cli\u003eEasily mountable to new or existing in-tank hangers\u003c\/li\u003e\n\u003cli\u003ePositive displacement for robust performance\u003c\/li\u003e\n\u003cli\u003eManufactured in TI Automotive's Caro, Michigan plant - Made In USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GSS352 Fuel Pump Only\u003c\/li\u003e\n\u003cli\u003e1 x Installation Fitting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Actual product may vary from image shown\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":34424826855586,"sku":"GSS352G3Kit","price":174.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT_f5ee9aed-aed1-4430-981b-815de75f1450.jpg?v=1590292648"},{"product_id":"walbro-fuel-pump-gss352-350-lph-with-fitting-kit-forester-sg-03-07","title":"Walbro - Fuel Pump - GSS352- 350 LPH With Fitting Kit (Forester - SG 03-07)","description":"\u003cp\u003eSUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V\u003c\/p\u003e\n\u003cp\u003eGSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!\u003c\/p\u003e\n\u003cp\u003eWalbro \/ TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e350 LPH \/ 90 GPH RATED AT 40PSI 13.5V\u003c\/li\u003e\n\u003cli\u003eFeatures an upgraded outlet design with improved one piece construction\u003c\/li\u003e\n\u003cli\u003eFuel: Gas\u003c\/li\u003e\n\u003cli\u003eOE quality\u003c\/li\u003e\n\u003cli\u003e39mm diameter\u003c\/li\u003e\n\u003cli\u003eEasily mountable to new or existing in-tank hangers\u003c\/li\u003e\n\u003cli\u003ePositive displacement for robust performance\u003c\/li\u003e\n\u003cli\u003eManufactured in TI Automotive's Caro, Michigan plant - Made In USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GSS352 Fuel Pump Only\u003c\/li\u003e\n\u003cli\u003e1 x Installation Fitting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Actual product may vary from image shown\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":34424826888354,"sku":"GSS352G3Kit","price":174.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/GSS342-WRX-KIT_386eea5a-0de5-4a66-a954-b627cefa9a5d.jpg?v=1590292696"},{"product_id":"walbro-525-e85-fuel-pump-f90000285-with-fitting-kit","title":"Walbro - 525 E85 Fuel Pump - F90000285 - 470 L\/PH With Fitting Kit","description":"\u003cdiv class=\"col-12\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eEnjoy the highest output on today's market with Walbro's new DCSS 39\/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel: Petrol \u0026amp; E85\u003c\/li\u003e\n\u003cli\u003eHorsepower: 900+ at 60PSI, naturally aspirated applications\u003c\/li\u003e\n\u003cli\u003eOver All Pump Length: 131mm\u003c\/li\u003e\n\u003cli\u003eMain Housing Diameter: 39mm\u003c\/li\u003e\n\u003cli\u003eLower Housing Diameter: 50mm\u003c\/li\u003e\n\u003cli\u003eFuel Inlet Diameter: 11mm OD\u003c\/li\u003e\n\u003cli\u003eFuel Outlet Diameter: 11mm OD\u003c\/li\u003e\n\u003cli\u003eFlow Rate: 470lph @ 40psi (120+ gph)\u003c\/li\u003e\n\u003cli\u003eTest Voltage: 13.5 Volts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"col-12 mb-4\"\u003e\n\u003ch3\u003eWHAT'S INCLUDED\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12\"\u003e\n\u003cp\u003e(1) Walbro 470LPH Pump\u003cbr\u003e(1) Wiring Harness\u003cbr\u003e(1) Fuel Strainer\u003c\/p\u003e\n\u003cdiv class=\"col-12 mb-4\"\u003e\n\u003ch3\u003eCOMPATIBILITY\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12\"\u003e\n\u003cp\u003ePlease note this is a Universal Product - alteration may be required to fit this product to your specific vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":37707415814306,"sku":"F90000285","price":274.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/F90000285.jpg?v=1612226373"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-top-fpd-port","title":"Radium - Top Feed Upgrade Fuel Rails w\/Top FPD Port - WRX\/STi (01-05)","description":"\u003cp\u003e\u003cstrong\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2005 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2001-2005 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2003-2008 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786642407586,"sku":"20-0577-02","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02.jpg?v=1619577474"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-top-fpd-port-forester-xt-sg-01-07","title":"Radium - Top Feed Upgrade Fuel Rails w\/Top FPD Port -  Forester XT SG (03-07)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2001-2005 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2001-2005 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2003-2008 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786667507874,"sku":"20-0577-02","price":384.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02_1f11c649-e9c8-421f-a1d9-308f109f12b6.jpg?v=1619577659"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-bottom-fpd-port-wrx-01-14","title":"Radium - Top Feed Upgrade Fuel Rails w\/Bottom FPD Port - WRX (01-14)","description":"\u003cp\u003e\u003cstrong\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2007 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2003-2007 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786681467042,"sku":"20-0567-02","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02_0ea4a2a2-2be8-4a12-bfd0-cfeb4a4d0b8f.jpg?v=1619577884"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-bottom-fpd-port-sti-01","title":"Radium - Top Feed Upgrade Fuel Rails w\/Bottom FPD Port - STi (01+)","description":"\u003cp\u003e\u003cstrong\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2007 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2003-2007 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786684416162,"sku":"20-0567-02","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02_eca87a06-76de-48d7-a8b0-dd3ad3481363.jpg?v=1619577975"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-bottom-fpd-port-forester-xt-03-13","title":"Radium - Top Feed Upgrade Fuel Rails w\/Bottom FPD Port - Forester XT (03-13)","description":"\u003cp\u003e\u003cstrong\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2007 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2003-2007 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786686349474,"sku":"20-0567-02","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02_b1b7433a-9978-47fd-8e22-086b768abb28.jpg?v=1619578007"},{"product_id":"radium-top-feed-upgrade-fuel-rails-w-bottom-fpd-port-liberty-gt-07-09","title":"Radium - Top Feed Upgrade Fuel Rails w\/Bottom FPD Port - Liberty GT (07-09)","description":"\u003cp\u003e\u003cstrong\u003eNote: Fuel Pulse Dampener (FPD) Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThese fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02. However, each fuel rail has an 8AN ORB \"top port\", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372). The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown above).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 20mm (x4)\u003c\/li\u003e\n\u003cli\u003ePhenolic Thermal Insulating Press-In Spacers, 15mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB but fittings are not included.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2007 Subaru WRX EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru STI EJ20 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003cli\u003e2003-2007 Subaru Forester XT EJ25 (w\/Top Feed Injectors and fitted with AVCS Solenoid Pictured Above)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"radium","offers":[{"title":"Default Title","offer_id":39786734223522,"sku":"20-0567-02","price":366.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-0479-02_de3f2f14-ace1-41c8-9947-7dd156e5913a.jpg?v=1619578503"},{"product_id":"aem-30-amp-accessory-hard-wire-relay-kit","title":"AEM - 20 Amp Accessory Hard Wire Relay Kit","description":"\u003cp\u003eAEM has released a 30-Amp Relay Kit (PN 30-2061) and 20-Amp Relay Kit (PN 30-2062) for ensuring that electric powered accessories receive the correct current and voltage to perform at their rated performance numbers.\u003c\/p\u003e\n\u003cp\u003eThe 20-Amp Relay kit is specifically designed for use with AEM’s High Flow In-Tank Fuel Pumps and other electric fuel pumps and ensures that the pumps perform at their rated flow levels.\u003c\/p\u003e\n\u003cp\u003eAEM’s 30-Amp Relay kit is designed to safeguard the performance of nitrous heating blankets, water pumps, fans, alternators, starters and other auxiliary electrical accessories that require higher current.\u003c\/p\u003e\n\u003cp\u003eThese relay kits have auto-reset style integrated circuit boards that help ensure any electrical shorts are remedied. Each kit includes a pre-wired relay receptacle with 80” of red wire for activation (12 gauge for 20-Amp Relay Kit and 10 gauge for 30-Amp Relay Kit) and 80” of 10 gauge black wire for a high current ground circuit, an Amp relay, circuit breaker with mounting tab, crimp terminals and mounting hardware.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAEM 20 \u0026amp; 30 Amp Relay Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures correct current and voltage at electrical accessories for optimum performance\u003c\/li\u003e\n\u003cli\u003eAuto-reset style integrated circuit breaker with mounting tab\u003c\/li\u003e\n\u003cli\u003ePre-wired relay receptacles with 80” of activation and ground wire\u003c\/li\u003e\n\u003cli\u003e30-Amp relay (PN 30-2061) or 20-Amp relay (PN 30-2062)\u003c\/li\u003e\n\u003cli\u003eTerminals and mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon uses of the 20 Amp relay kit are for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Pump activation (in-tank)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20 Amp Circuit Breaker, Auto Reset, Splash and Dust Proof\u003c\/li\u003e\n\u003cli\u003e30 Amp Relay\u003c\/li\u003e\n\u003cli\u003eRelay Socket with 12 Gauge Power Wires 80\" Length\u003c\/li\u003e\n\u003cli\u003e10-12 Gauge Ring Terminals\u003c\/li\u003e\n\u003cli\u003eRed Butt Connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42068322353409,"sku":"30-2062","price":131.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/aem.jpg?v=1637110063"},{"product_id":"genuine-subaru-intank-fuel-pump-filter-wrx-sti-08-14","title":"Genuine Subaru - INTANK Fuel Pump Filter WRX  (08-14)","description":"\u003cspan data-mce-fragment=\"1\"\u003eSUBARU OEM MY08-14 Fuel Filter \u003c\/span\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":43171786817793,"sku":"SAS1055","price":155.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/mono40664225-180424-02.webp?v=1659932580"},{"product_id":"genuine-subaru-intank-fuel-pump-filter-forester-sh-08-14","title":"Genuine Subaru - INTANK Fuel Pump Filter - Forester SH (08-14)","description":"\u003cspan data-mce-fragment=\"1\"\u003eSUBARU OEM MY08-14 Fuel Filter \u003c\/span\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":43171787440385,"sku":"SAS1055","price":155.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/mono40664225-180424-02_ea20710b-eb74-4b9b-b7cb-dfb41f081e00.webp?v=1659932664"},{"product_id":"psr-by-radium-fuel-rail-plumbing-kit-ej20-ej25","title":"Radium Fuel Rail Plumbing Kit - (EJ20\/EJ25)","description":"\u003cp\u003eThese kits offer quality nylon-braided PTFE fuel hose with a range of Billet fittings to plumb your new parallel fuel rail kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePTFE Hose\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePTFE is the ultimate hose material. It has outstanding resistance to chemicals including alcohol fuels such as methanol, ethanol, E85 and leaded fuels such as race gas. It is also suitable for brake, transmission, clutch, power steering, and coolant. PTFE hose has ~zero~ permeation and will not emit vapors like rubber fuel hose, so it is safe to use in confined spaces such as a vehicle’s trunk or small garage.\u003cbr\u003e\u003cbr\u003eAll Radium Engineering PTFE hoses have been successfully tested in-house to 1200psi although PTFE can typically withstand 2500psi+. They are also for extreme temperatures (-94F to +480F). They feature an extruded PTFE (fluoropolymer) core wrapped in a stainless steel wire braided sleeve. The outer coating is determined by the assembly process: Universal DIY ends (braided PET) or preassembled crimped ends (smooth PVC). All hose ends are type-II black anodized aluminum. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePTFE Hose Ends\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese hose ends are specific to PTFE hose and cannot be used with rubber hose. Each fitting is machined from aluminum and anodized black. Internal O-rings permit swivelling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese kits are available in 4 options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eV1\n\u003cul\u003e\n\u003cli\u003eDoes not include a Fuel Pressure Regulator but includes fittings to suit aftermarket twin-inlet AN-6 regulators\u003c\/li\u003e\n\u003cli\u003eIncludes straight male fittings for the fuel rails with a 90-degree hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eV2\n\u003cul\u003e\n\u003cli\u003eDoes not include a Fuel Pressure Regulator but includes fittings to suit aftermarket twin-inlet AN-6 regulators\u003c\/li\u003e\n\u003cli\u003eIncludes low-profile swivel banjo fittings for the fuel rails with a 45-degree hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eV3\n\u003cul\u003e\n\u003cli\u003eRadium Engineering Multi-Port Fuel Pressure Regulator with mounting bracket\u003c\/li\u003e\n\u003cli\u003eIncludes straight male fittings for the fuel rails with a 90-degree hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eV4\n\u003cul\u003e\n\u003cli\u003eRadium Engineering Multi-Port Fuel Pressure Regulator with mounting bracket\u003c\/li\u003e\n\u003cli\u003eIncludes low-profile swivel banjo fittings for the fuel rails with a 45-degree hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHose and Fittings are not assembled. Fuel hose will need to be cut to appropriate lengths and have the hose ends fitted professionally. \u003c\/li\u003e\n\u003cli\u003eExcess hose is supplied to allow for multiple plumbing routes.\u003c\/li\u003e\n\u003cli\u003eFuel Rails are not included, however this kit is compatible with any aftermarket fuel rail with AN-8 ORB ports.\u003c\/li\u003e\n\u003cli\u003eAdditonal hose ends are included to allow for different fitment options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese kits will suit the following vehicles easily:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2008-2014 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2015-2021 Subaru STI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe following vehicles can use the plumbing kit but the Radium FPR bracket for the V2 and V4 kits will not be suitable\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2009 Subaru Liberty GT\u003c\/li\u003e\n\u003cli\u003e2004-2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003e2008-2013 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe following vehicles can use the plumbing kit, however the fuel feed and fuel return lines do not utilise the SAE EFI Quick Connect style fittings. For vehicles without this SAE fitting additional parts will be required to convert the OEM hard fuel lines to AN-6 male flares. In addition, these vehicles utilise a fuel filter located in the engine bay which will not be suitable with this plumbing kit and an aftermarket filter will need to be purchased separately. The Radium FPR bracket for the V2 and V4 kits will not be suitable for these vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1994-2000 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e1994-2000 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru STI\u003c\/li\u003e\n\u003cli\u003e1997-2002 Subaru Forester GT\u003c\/li\u003e\n\u003cli\u003e2003-2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Straight Fitting w\/ 90 deg Hose End \/ Include Radium FPR w\/ Mounting bracket","offer_id":43802428539137,"sku":"20-1160-V3","price":884.0,"currency_code":"AUD","in_stock":true},{"title":"Straight Fitting w\/ 90 deg Hose End \/ Suit Universal 6AN FPR - Not included","offer_id":43802428571905,"sku":"20-1160-V1","price":599.0,"currency_code":"AUD","in_stock":true},{"title":"Banjo Swivels \/ Include Radium FPR w\/ Mounting bracket","offer_id":43802428604673,"sku":"20-1160-V4","price":959.0,"currency_code":"AUD","in_stock":true},{"title":"Banjo Swivels \/ Suit Universal 6AN FPR - Not included","offer_id":43802428637441,"sku":"20-1160-V2","price":674.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/20-1160.jpg?v=1678682619"},{"product_id":"genuine-subaru-intank-fuel-pump-filter-fa20-15-2","title":"Genuine Subaru - INTANK Fuel Pump Filter - FA20 (15-21)","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSUBARU OEM MY15-21 Fuel Filter FA20  \u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":43860197572865,"sku":"SAS1101","price":266.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/products\/s-l1600_1.png?v=1681962971"},{"product_id":"genuine-subaru-intank-fuel-pump-filter-sti-08-2020","title":"Genuine Subaru - INTANK Fuel Pump Filter STi  (08-20)","description":"\u003cspan data-mce-fragment=\"1\"\u003eSUBARU OEM STi MY08-20 Fuel Filter \u003c\/span\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":43966351245569,"sku":"SAS1055","price":155.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/mono40664225-180424-02_1.webp?v=1689900097"},{"product_id":"radium-diy-fuel-pump-hard-wiring-kit","title":"Radium DIY Fuel Pump Hard Wiring Kit","description":"\u003cp\u003eThis Do-It-Yourself wiring kit includes the necessary parts to construct a power wiring harness for one fuel pump. It uses the highest quality components to ensure proper operation in all conditions. The relay and fuse holder are sealed to allow installation in weather exposed areas if necessary. Aircraft grade TXL wiring is resistant to all chemicals and elevated temperatures. Raychem crimpless solder-based butt connectors make reliable wire connections easy and clean. Necessary ring terminals are included for connecting to an external Bosch 044 fuel pump as well.\u003c\/p\u003e\n\u003cp\u003eRadium recommends a dedicated fuse and relay for each fuel surge tank pump. For this reason,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eorder a wiring kit for EACH fuel pump\u003c\/strong\u003e\u003c\/span\u003e. Examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf a Radium Single Internal Pump FST was purchased, select \"Quantity: 1\".\u003c\/li\u003e\n\u003cli\u003eIf a Radium Dual Vertical Bosch 044 FST was purchased, select \"Quantity: 2\".\u003c\/li\u003e\n\u003cli\u003eIf a Radium Triple Pump MPFST was purchased, select \"Quantity: 3\". \u003c\/li\u003e\n\u003cli\u003eIf a Radium Subaru Dual Pump Hanger was purchased, select \"Quantity: 2\". \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: the relay \"trigger\" can be connected to a ground or 12V signal as long as the other end of the low current relay coil wire is connected to an opposing source.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherproof SPDT 12V\/40A Relay with Mounting Tab (x1)\u003c\/li\u003e\n\u003cli\u003eWeatherproof Relay Flying 12\" Lead Connector (x1)\u003c\/li\u003e\n\u003cli\u003eWeatherproof Mini Fuse Holder with Mounting Tab (x1)\u003c\/li\u003e\n\u003cli\u003eWeatherproof Mini Fuse Flying Lead Connector (x1)\u003c\/li\u003e\n\u003cli\u003eQuick-Connect Posi-Tap \"TRIGGER\" Connector (x1)\u003c\/li\u003e\n\u003cli\u003eRaychem Crimpless Solder Heat Shrink Butt Splices (x4)\u003c\/li\u003e\n\u003cli\u003e10AWG 6mm Stud Ring Terminals (x4)\u003c\/li\u003e\n\u003cli\u003e10AWG 5mm Stud Ring Terminal (x1)\u003c\/li\u003e\n\u003cli\u003e10AWG Black TXL Wire (10ft)\u003c\/li\u003e\n\u003cli\u003e10AWG Red TXL Wire (10ft)\u003c\/li\u003e\n\u003cli\u003e20A LED Blade Mini Fuse (x1)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions including wiring diagrams\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685653008641,"sku":"17-0031","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/17-0031.webp?v=1756689623"},{"product_id":"radium-fuel-pump-inlet-filter-sock","title":"Radium Fuel Pump Inlet Filter Sock","description":"\u003cp\u003eThis 65 Micron pre-filter sock easily installs and has been confirmed to work on the following popular in-tank fuel pumps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWalbro 255 GSS341\u003c\/li\u003e\n\u003cli\u003eWalbro 255 GSS342\u003c\/li\u003e\n\u003cli\u003eWalbro F9000262\u003c\/li\u003e\n\u003cli\u003eWalbro F9000267\u003c\/li\u003e\n\u003cli\u003eWalbro F9000273\u003c\/li\u003e\n\u003cli\u003eWalbro F9000274\u003c\/li\u003e\n\u003cli\u003eWalbro F9000285\u003c\/li\u003e\n\u003cli\u003eWalbro F9000295\u003c\/li\u003e\n\u003cli\u003eAEM 50-1000 Gas\u003c\/li\u003e\n\u003cli\u003eAEM 50-1200 E85\u003c\/li\u003e\n\u003cli\u003eAeromotive 340R 11141\u003c\/li\u003e\n\u003cli\u003eAeromotive 340R 11142\u003c\/li\u003e\n\u003cli\u003eDeatschwerks 9-301-1000 \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685653303553,"sku":"14-0143","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/14-0143.jpg?v=1756690065"},{"product_id":"radium-fuel-pump-hanger-subaru-wrx-08-21-sti-08-21-fxt-08-18-lgt-04-09","title":"Radium Fuel Pump Hanger - Subaru WRX 08-21\/STI 08-21\/FXT 08-18\/LGT 04-09","description":"\u003cp\u003e\u003cstrong\u003eNote: 15-21 Subaru WRX and 13-18 Forester XT require extra components described below\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Radium fuel pump hanger for late model Subaru vehicles replaces the OEM unit and allows the use of 1 or 2 high-flow aftermarket fuel pumps. The system is safe to use with alternative fuels such as E85. The machined assembly mounts in the factory fuel tank using the OEM gasket and replaces the OEM hold-down flange. No permanent modifications are required making installation simple.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo help prevent starvation, the anodized aluminum collector box keeps fuel trapped around the pumps. Furthermore, there are two 1-way fill valves on the collector box thats allow fuel in but not out. Each fill valve flows 355LPH (710LPH total). The included a venturi jet pump features an integrated PRV (pressure relief valve). This transfers fuel from the passive side of the OEM fuel tank to the active side where the pump(s) reside. This unique design creates suction without restricting the return line.\u003c\/p\u003e\n\u003cp\u003eFurthermore, all returning fuel from the FPR return and the crossover hose enter the collector box through a one-way duckbill valve keeping it full. The duckbill valve prevents back flow and reduces fuel spray noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLUMBING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs described below, there are 3 external ports:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1. FUEL PUMP OUT\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThis port is thread tapped for 8AN ORB (3\/4\"-16). A SAE quick connect male adapter fitting is preinstalled for connecting to the OEM feed line.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2. FPR RETURN\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis port is thread tapped for 6AN ORB (9\/16\"-18). A SAE quick connect male adapter fitting is preinstalled for connecting to the OEM return line. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3. CROSSOVER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis port is thread tapped for 6AN ORB (9\/16\"-18). A SAE quick connect male adapter fitting is preinstalled for connecting to the OEM crossover line. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAn external fuel hanger plumbing kit is no longer required if the factory fuel lines are reused (as shown above). Each fuel pump merges internally into a single port. External fuel line merging is no longer required. NOTE: a post pump fuel filter is still required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eELECTRICAL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pump applications can reuse the OEM fuel pump controller wiring, as shown below. However, it is recommended to upgrade the OEM wiring to get the maximum potential out of these high current, high flow pumps. Fuel pump wiring kits can be purchased separately\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-DIY-Fuel-Pump-Hard-Wiring-Kit-17-0031\"\u003ehere\u003c\/a\u003e. Select qty1 for single pump applications and qty2 for dual pump applications.\u003c\/p\u003e\n\u003cp\u003eUnlike compact multi-pin electrical connectors, these custom designed stainless steel electrical studs easily handle the high current demand from aftermarket fuel pumps. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM access cover. Each pump has it's own dedicated +\/- electrical connections. Nonconductive anodized acorn nuts are provided to prevent any accidental short circuits. All necessary electrical hardware is provided for external wiring connections.\u003c\/p\u003e\n\u003cp\u003eThe factory fuel temperature and level sensors are re-used. The collector box permits mounting for level as shown above. The internal pump bracket permits mounting for the temperature sensor. Consult the installation instructions link at the top of this page for more details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePUMP CONFIGURATIONS\u003c\/strong\u003e\u003cbr\u003eThese kits are compatible with 1 or 2 fuel pumps. They are suited, but not limited, to the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWalbro F90000267 E85 - requires 14-0143 filter (1 per pump)\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274 E85 - requires 14-0143 filter (1 per pump)\u003c\/li\u003e\n\u003cli\u003eWalbro F90000285 E85 - requires 14-0143 filter (1 per pump)\u003c\/li\u003e\n\u003cli\u003eWalbro GSS342 255lph - requires 14-0143 filter (1 per pump)\u003c\/li\u003e\n\u003cli\u003eAEM 50-1200 E85 - pump kit includes filter\u003c\/li\u003e\n\u003cli\u003eDeatschwerks DW400 - pump kit includes filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized aluminum and laser engraved fuel hat\u003c\/li\u003e\n\u003cli\u003eCollector box with two 1-way fill valves\u003c\/li\u003e\n\u003cli\u003ePressure relief valve venturi jet pump\u003c\/li\u003e\n\u003cli\u003eStainless electrical terminals\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eSAE quick connect fittings\u003c\/li\u003e\n\u003cli\u003eSubmersible fuel tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: THE FUEL HANGER ELIMINATES THE POST PUMP FILTER. A LOW MICRON FUEL FILTER WILL NEED TO BE INSTALLED DOWNSTREAM. THE FUEL PLUMBING KITS BELOW INCLUDE THIS REQUIRED ITEM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e14-18 Subaru Forester XT and 15-21 Subaru WRX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2 vehicles listed above require extra components described below.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe OEM fuel tanks may be the same, but the OEM fuel units are completely different. To adapt the OEM fuel level sensor to the Radium fuel pump hanger, 20-0850 FUEL LEVEL SENDER ADAPTER, FA20 is required (sold separately).\u003c\/li\u003e\n\u003cli\u003eThe OEM fuel system is returnless. The fuel pressure regulator that is normally inside the OEM fuel unit is discarded. An aftermarket FPR is required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2015-2021 Subaru WRX*\u003c\/li\u003e\n\u003cli\u003e2008-2014 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2015-2021 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2008-2013 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2013-2018 Subaru Forester XT*\u003c\/li\u003e\n\u003cli\u003e2004-2009 Subaru Liberty GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Requires additional components as mentioned above\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Walbro F90000267\/274\/285","offer_id":46689416839425,"sku":"20-0782-00","price":943.99,"currency_code":"AUD","in_stock":true},{"title":"Walbro GSS342\/AEM 50-1200","offer_id":46689416872193,"sku":"20-0780-00","price":908.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0780-00.jpg?v=1756690382"},{"product_id":"radium-fuel-pump-hanger-subaru-wrx-sti-94-07-forester-97-08-liberty-89-98","title":"Radium Fuel Pump Hanger - Subaru WRX, STI 94-07\/Forester 97-08\/Liberty 89-98","description":"\u003cp\u003eThe Radium fuel pump hanger allows the use of 1 or 2 aftermarket high-flow fuel pumps and is compatible with early Subaru models. The machined assembly mounts in the factory fuel tank using the OEM gasket and hardware. The fuel level sender and temperature sensors are retained.\u003c\/p\u003e\n\u003cp\u003eThe pumps merge into a single port outlet with 8AN ORB threads. The crossover and return uses 6AN ORB threaded ports. To simplify plumbing, the kit includes OEM hose adapter fittings for all model years listed. Shown below is the configuration for older models which use all barbs.\u003c\/p\u003e\n\u003cp\u003eThe installed fittings shown pictured is for mid model years which use a SAE quick disconnect fuel feed. There is also a return line SAE quick disconnect fitting included for newer models. Lastly, -6AN male fittings are included for those that use aftermarket feed and return hoses. \u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the high quality in-tank wiring is insulated with chemically resistant PTFE. Stainless steel crimp-on ring terminals and heat shrink are provided for external wiring connections. The kit includes a venturi jet pump with a new integrated pressure relief valve that is optimized for high flow pump(s). The kit also includes a streamlined anodized aluminum collector box.\u003c\/p\u003e\n\u003cp\u003eUnlike the 2004-2007 WRX STi OEM variation, the Radium Engineering collector box has been optimized to work in ALL gas tanks. Shown pictured is the smallest OEM gas tank baffle found in the model range. It improves the fuel supply around the pump(s) inlet. There is a 1\" check valve incorporated on the front side of the tank that serves as a trap door keeping the pump(s) supplied with fuel during aggressive driving. Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. The OEM fuel level and fuel temperature sensors secure to the mounting bracket.\u003c\/p\u003e\n\u003cp\u003eSingle pump applications can reuse the OEM fuel pump controller, but it is recommended to upgrade the wiring as high flow fuel pumps draw additional current requiring larger gauge wire. Fuel pump wiring kits can be purchased separately (Part # 17-0031). Select qty1 for single pump applications and qty2 for dual pump applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Aluminum Laser Etched Plate\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Collector Box and Check Valve\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Venturi Jet Pump with Extra Orifice\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Fittings for All Model Years\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Dual Pump Mounts\u003c\/li\u003e\n\u003cli\u003ePTFE Wire with Stainless Steel Terminals\u003c\/li\u003e\n\u003cli\u003eSubmersible Rubber Fuel Hose\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf supplying your own pumps, select the option \"Pumps Not Included\" from the menu.\u003cbr\u003eNotes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThere will be enough components included with this option to use 1 or 2 fuel pumps. Depending on the setup, some parts will simply not be used.\u003c\/li\u003e\n\u003cli\u003eA pliable fuel pump filter sock must be used for proper fitment.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNext, select the type of pumps that will be used so the appropriate internal wiring connectors will be included in the kit. If pumps are needed, the kit will come with 65 micron sock filters to be installed on all fuel pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: This kit eliminates the OEM hanger's \"post\" fuel pump filter. A low micron aftermarket fuel filter should be installed downstream to protect the injectors from debris.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1994-2000 Subaru Impreza\/WRX\/STI GC\/GF\u003c\/li\u003e\n\u003cli\u003e2001-2007 Subaru Impreza\/WRX\/STI GD\/GG\u003c\/li\u003e\n\u003cli\u003e1997-2002 Subaru Forester SF\u003c\/li\u003e\n\u003cli\u003e2003-2008 Subaru Forester SG\u003c\/li\u003e\n\u003cli\u003e1989-1993 Subaru Liberty BC\/BF\u003c\/li\u003e\n\u003cli\u003e1993-1998 Subaru Liberty BD\/BG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685719757057,"sku":"20-0340-00","price":1100.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0340-00.jpg?v=1756690904"},{"product_id":"radium-fuel-rail-plumbing-kit-w-filter-subaru-wrx-08-14-sti-08-21-fxt-08-13-lgt-04-9","title":"Radium Fuel Rail Plumbing Kit w\/Filter - Subaru WRX 08-14\/STI 08-21\/FXT 08-13\/LGT 04-09","description":"\u003cp\u003eThese optional fuel hanger plumbing kits include a filter, hose, fittings, hardware, etc. They add the necessary post pump filtration required when using the Radium Engineering fuel pump hanger. An 8AN PTFE feed line routes from the Radium hanger up to the Radium fuel filter mounted under the vehicle. From the filter, an 8AN rubber hose is supplied to go to the fuel rails.\u003c\/p\u003e\n\u003cp\u003eA 6AN rubber return hose is included that routes fuel from the fuel pressure regulator back to the fuel pump hanger. As shown below, billet aluminum retainers are included to secure the fuel lines. The only difference between the 2 kits is the filter element (20-0629-03=stainless, 20-0629-05=microglass).\u003c\/p\u003e\n\u003cp\u003eThe filter bracket mounts to the chassis with no drilling or permanent modifications required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Aftermarket fuel rails and fuel pressure regulator are recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2008-2014 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2015-2021 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2008-2013 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2004-2009 Subaru Liberty GT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Stainless","offer_id":46685730996481,"sku":"20-0629-03","price":873.99,"currency_code":"AUD","in_stock":true},{"title":"Microglass","offer_id":46685731029249,"sku":"20-0629-05","price":838.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0629-03.jpg?v=1756691517"},{"product_id":"radium-parallel-fuel-rail-plumbing-kit-w-dmr-ra-regulator-subaru-wrx-08-14-sti-08-21-fxt-sh-lgt-07-14-ej20-ej25","title":"Radium Parallel Fuel Rail Plumbing Kit w\/DMR RA Regulator - Subaru WRX 08-14\/STI 08-21\/FXT SH\/LGT 07-14 (EJ20\/EJ25)","description":"\u003cp\u003eThese plumbing kits are designed to compliment Radium Engineering Subaru EJ fuel rail installations. Both kits interface with the factory feed and return hard lines in the engine bay (near the LH strut tower) and provide all the underhood fuel plumbing. Both kits are compatible with all Radium Fuel Rails for the Subaru EJ engines (excluding 20-0499 Fuel Rails). All necessary fittings and hoses are included, along with a RA-Series FPR. \u003c\/p\u003e\n\u003cp\u003eRA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. To aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure. Furthermore, RA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/li\u003e\n\u003cli\u003e3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/li\u003e\n\u003cli\u003ePush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003c\/li\u003e\n\u003cli\u003eVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTwo kits are offered; one that feeds the fuel rails in series, and another that feed the fuel rails in a parallel configuration. Both kits perform equally well. The end decision is based on personal preference. Scroll down for details on each kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT NOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eNeither kit includes a fuel filter.\u003c\/li\u003e\n\u003cli\u003eNeither kit is compatible with Radium dual port injector fuel rail kit 20-0499.\u003c\/li\u003e\n\u003cli\u003eBoth kits are safe to use with alcohol fuels such as methanol, ethanol, E85 etc.\u003c\/li\u003e\n\u003cli\u003eBoth kits use 3\/8\" (6AN) high pressure EFI fuel hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL RAIL PLUMBING KIT, SUBARU EJ, PARALLEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause of the regulator mounting location, the parallel fuel rail plumbing kit is only compatible with the 2008+ Impreza (WRX\/STi) and Forester platform.\u003c\/p\u003e\n\u003cp\u003eBecause the hoses and fittings are consolidated, the parallel kit is a good option for cleaning up the engine bay. Each fuel rail is fed as shown in the photo above. The feed and return lines enter the Radium Multi-Port Regulator (MPR) from the rear and output through the front to the fuel rails.\u003c\/p\u003e\n\u003cp\u003eAs shown above, the regulator secures to the LH strut tower using the provided stainless steel mounting bracket. A Radium 0-100psi fuel pressure gauge is included for calibration. Fittings and 6AN hose are included to interface with the OEM feed and return hard lines. If aftermarket -AN hoses\/lines have replaced the factory piping, this kit can still be used \u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685731619073,"sku":"20-0984","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0984.jpg?v=1756691790"},{"product_id":"radium-series-fuel-rail-plumbing-kit-w-dmr-ra-regulator-subaru-wrx-sti-fxt-lgt-ej20-ej25-1","title":"Radium Series Fuel Rail Plumbing Kit w\/DMR RA Regulator - Subaru WRX\/STI\/FXT\/LGT (EJ20\/EJ25)","description":"\u003cp\u003eThese plumbing kits are designed to compliment Radium Engineering Subaru EJ fuel rail installations. Both kits interface with the factory feed and return hard lines in the engine bay (near the LH strut tower) and provide all the underhood fuel plumbing. Both kits are compatible with all Radium Fuel Rails for the Subaru EJ engines (excluding 20-0499 Fuel Rails). All necessary fittings and hoses are included, along with a RA-Series FPR. \u003c\/p\u003e\n\u003cp\u003eRA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. To aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure. Furthermore, RA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/li\u003e\n\u003cli\u003e3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/li\u003e\n\u003cli\u003ePush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003c\/li\u003e\n\u003cli\u003eVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTwo kits are offered; one that feeds the fuel rails in series, and another that feed the fuel rails in a parallel configuration. Both kits perform equally well. The end decision is based on personal preference. Scroll down for details on each kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT NOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eNeither kit includes a fuel filter.\u003c\/li\u003e\n\u003cli\u003eNeither kit is compatible with Radium dual port injector fuel rail kit 20-0499.\u003c\/li\u003e\n\u003cli\u003eBoth kits are safe to use with alcohol fuels such as methanol, ethanol, E85 etc.\u003c\/li\u003e\n\u003cli\u003eBoth kits use 3\/8\" (6AN) high pressure EFI fuel hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL RAIL PLUMBING KIT, SUBARU EJ, SERIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is compatible with all Impreza (WRX\/STi) platforms that use an EJ motor. For early vehicles with an engine bay mounted fuel filter, consult the installation instructions.\u003c\/p\u003e\n\u003cp\u003eThis kit interfaces with the factory hard lines near the LH strut tower using SAE quick connects or older hose barb connections. An adjustable Radium Direct Mount Regulator (DMR) and Radium 0-100psi fuel pressure gauge are included. The fuel pressure gauge can be installed at any of the 6AN junctions before the regulator using the included adapter. The 6AN swivel fuel rail fittings are low profile making them ideal for the tight spaces associated with the EJ motor. The variety of reuseable PushLok hose ends permit customizing (such as adding a flex fuel sensor) making installation quick and painless. The included 6AN fuel hose can be cut with standard tools and assembled without special skills. Unlike standard low-quality rubber fuel hose that degrades with alternate fuels, the provided hose is resistant to all fuels including E85.\u003cbr\u003eThe contents of the 20-0578 kit are shown in the photo below.\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685734338817,"sku":"20-0978","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0978_1.jpg?v=1756693022"},{"product_id":"radium-top-feed-upgrade-fuel-rails-subaru-liberty-outback-00-03-ez30-h6","title":"Radium Top Feed Upgrade Fuel Rails - Subaru Liberty\/Outback 00-03 (EZ30 H6)","description":"\u003cp\u003eManufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThese H-6 fuel rails are for the original Subaru EZ30 \"Phase-I\" flat 6 engine. This engine is denoted by having a single exhaust port per bank. These engines also incorporate the Subaru air-assist fuel injection system. Each fuel rail has three 8AN ORB threaded ports (6 total). To reuse the OEM FPR, use Radium part # 20-0301.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL INJECTOR FITMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOEM Injectors:\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering fuel rail features 11mm injector bores making it compatible with the factory Subaru EZ30 Phase-I \"air-assist\" fuel injectors. No modifications are needed. If preparing to use aftermarket fuel injectors, read below.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAftermarket Injectors:\u003c\/p\u003e\n\u003cp\u003eThe Phase-I EZ30 uses air-assist emissions equipment. These engines use a unique OEM fuel injector that is not replicated in the aftermarket. In order to use universal aftermarket fuel injectors, these cylinder heads require the provided Radium injector seats. When these injector seats are installed into the air-assist cylinder heads, an aftermarket injector that is 48mm long with 11mm upper O-ring and 14mm lower O-ring must be used. The following universal injectors have been verified to be compatible. However there are others on the market that will work that are not listed here.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjector Dynamics ID1050-XDS-48-11-14\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics ID1300-XDS-48-11-14\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics ID1700-XDS-48-11-14\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics ID2600-XDS-48-11-14\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Laser Etched Aluminum Fuel Rails (x2)\u003c\/li\u003e\n\u003cli\u003eSubaru Air Assist Injewctor Seats (x6)\u003c\/li\u003e\n\u003cli\u003eThermal Insulating Press-In Spacers, 11mm (x4)\u003c\/li\u003e\n\u003cli\u003eStainless Steel M8x1.25 Mounting Bolts (x8)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685763141889,"sku":"20-0764-02","price":663.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0764-02.jpg?v=1756694802"},{"product_id":"radium-fuel-rail-adapter-subaru-ver8-9-ej207-2-5i-ej253","title":"Radium Fuel Rail Adapter - Subaru Ver8\/9 EJ207, 2.5i EJ253","description":"\u003cp\u003eThe Subaru Impreza 2.5i (EJ253) and JDM Ver8\/9 (EJ207) STi intake manifolds are great solutions for eliminating the tumble generator valves on modified engines.\u003c\/p\u003e\n\u003cp\u003eThese Radium Engineering adapters permit the use of any OEM or aftermarket Subaru top feed fuel rail (such as Radium 20-0479) to be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Fuel Rails Not Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe slotted hole positioning below is specifically for the Subaru EJ253 intake manifold. Moving the adapters outwards allows fuel rail fitment for the Ver 8\/9 JDM EJ207 STi intake manifold.\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685803643137,"sku":"20-0372","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0372.jpg?v=1756695239"},{"product_id":"radium-fpr-ra-fuel-pressure-regulator-kit-subaru-sti-08-21","title":"Radium FPR RA Fuel Pressure Regulator Kit - Subaru STI 08-21","description":"\u003cp\u003eThis kit is designed for use in the USDM 08-21 Subaru WRX STi (EJ257 only). It replaces the OEM fuel pressure regulator and damper assembly, shown below. The factory STi fuel line routing uses a quasi dead-end system that circulates fuel through the regulator, bypassing the engine. Fuel is only routed to the engine when there is demand.\u003c\/p\u003e\n\u003cp\u003eThe Radium FPR kit re-routes fuel to cycle through the fuel rails before reaching the regulator and returning to the tank. This is the preferred fuel line routing by Subaru tuners trying to address stumbling issues. The kit installs in the same location as the OEM fuel pressure regulator. Also included are vacuum hose and fittings to re-route the vacuum reference line from the #4 cylinder runner to the intake manifold plenum for a more stable vacuum signal. The optional pressure guage kit 20-0386 can be installed into the unused 8AN ORB port on the regulator.\u003c\/p\u003e\n\u003cp\u003eThe regulator features the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. To aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure. A newly designed single stainless steel return orifice generates laminar flow that enhances stability control.\u003c\/p\u003e\n\u003cp\u003eThe regulator also features a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required. There are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/li\u003e\n\u003cli\u003e3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/li\u003e\n\u003cli\u003ePush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003c\/li\u003e\n\u003cli\u003eVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis FPR kit is suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, it is compatible with alcohol blends of fuel including methanol, ethanol, and E85. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685810786561,"sku":"20-0965","price":471.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0965.jpg?v=1756696460"},{"product_id":"radium-fuel-level-sensor-adaptor-subaru-wrx-va-15-21-forester-xt-sj-13-18","title":"Radium Fuel Level Sensor Adaptor - Subaru WRX VA 15-21\/Forester XT SJ 13-18","description":"\u003cp\u003e\u003cspan\u003eSubaru FA20F vehicles use a returnless fuel system. And because the OEM fuel unit is different, the fuel level float is unique as well. This kit provides the proper fuel level mount for the OEM sensor. It also includes a plate to block-off the unused holes on the collector box. Select this option if installing the Radium fuel pump hanger into a Subaru FA20F engine vehicle..\u003c\/span\u003e\u003c\/p\u003e","brand":"DC Jap Automotive","offers":[{"title":"Default Title","offer_id":46685872783617,"sku":"20-0850","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1921\/7937\/files\/20-0850.jpg?v=1756696783"}],"url":"https:\/\/dcjapautomotive.com\/collections\/fuel-system.oembed?page=3","provider":"DC Jap Automotive","version":"1.0","type":"link"}